ADH-33 Premium Rubber Polymer Modified Tile Adhesive

(C2ETS1)

ADH-33 (C2ETS1) a Premium flexible rubber & polymer modified Tile Adhesive. Used for internal and external wall and floor tiling applications.

C2ETS1 Large Format Tile Adhesive.

C2 – High Adhesion Strength

E – Extended Open Time

T – Non Slip/Non Slump

S1 – Good Flexibility

ADH-33 PDS

ADH-33 SDS

Greenstar

 

ADH-33 is suitable for use over tiling over concrete, including early age concrete (7 days), Green Screed, cement render, fibrous cement sheeting, plasterboard and over existing tiles.

ADH-33 is suitable for shower recesses. And is ideally suited for use over ACT WP-1 (class III) under tile Waterproofing Membrane and other ACT Australia approved under tile waterproofing membranes. ADH-33 has superior non-slip/ non-slump properties suitable for laying large format tiles. ADH33 has crack bridging capability <1mm

ADH-33 Tile Adhesive is mixed with approximately 8.4L of clean drinking water per 20kg bag. Each bag will give you 11 square metres of coverage with a 10mm notch trowel.