Engineered adhesion systems for every stage of a tiling and waterproofing job, designed and manufactured in Australia for Australian conditions.
From adhesives, grout and screed through to waterproofing, primers, soundproofing and tile levelling, each range is built to work together as a complete system rather than a one-off product.
Browse by category below, or use the Product Calculator and Technical Data tools to spec the right products for your project.
Engineered tile adhesives built for Australian conditions, from standard internal fix-outs to heavy-traffic commercial floors and fully submerged pools. The range spans rubber-modified, powder mastic, high-polymer and lightweight formulations, so there’s a fit for every substrate, tile size and traffic load. All ACT adhesives feature Infused Primer Technology (IPT), cutting out separate priming on most standard substrates.
Discover Products
Lightweight, flexible grout and matching acetoxy silicone designed to finish tiled surfaces cleanly and hold up over time. Spectrum Futura is easier to mix and apply than traditional cement grout, resists cracking on crazy pave and pool joints up to 30mm, and comes in a full colour range — check the colour selector tool to match your project.
Discover Products
Self-levelling cement, engineered screed and pool render for getting substrates flat, sound and ready to tile. Whether you’re building floor falls, correcting an uneven slab, or rendering a pool shell, this range is engineered to bond reliably to concrete, existing tile (with the right primer) and other common substrates.
Discover Products
Waterproofing membranes and sealants for wet areas, retaining walls, rooftops and swimming pools. The range covers under-tile SBR membranes, UV-stable trafficable membranes, epoxy moisture barriers and MS-PU sealant, so wet areas, balconies and pools stay protected and ready for tiling or rendering over the top.
Discover Products
Primers and additives for the substrates that standard tile adhesive doesn’t handle on its own — impervious surfaces, existing tile, epoxy floors and moisture-prone slabs. Because ACT adhesives already include Infused Primer Technology, this range is for the trickier jobs: check the FAQs, Product Data Sheets or contact ACT Australia Technical Department to confirm when priming is actually needed.
Discover Products
Our ADH-77 Soundflex highly flexible acoustic tile adhesive is engineered to cut impact sound transfer through tiled floors. CSIRO tested, it meets BSA requirements as part of our advanced Impact Sound Reduction system. It combines strong bond strength with the flexibility needed to meet acoustic ratings in apartments, units and multi-residential buildings, applied with the ADH-77 modified trowel for consistent coverage.
Discover Products
The EZE-Clip tile levelling system keeps large-format tiles flat and lippage-free during installation, with wedge and clip options matched to different tile thicknesses. Colour-coded clips (red, orange, yellow) make it easy to grab the right size on site. Australian and US patented design ensures that clips don’t break during application and remove cleanly once the adhesive has cured.
Discover Products