Engineered tile adhesives built for Australian conditions, from standard internal fix-outs to heavy-traffic commercial floors and fully submerged pools. The range spans rubber-modified, powder mastic, high-polymer and lightweight formulations, so there’s a fit for every substrate, tile size and traffic load. All ACT adhesives feature Infused Primer Technology (IPT), cutting out separate priming on most standard substrates.
For commercial and heavy traffic areas ADH-55 & ADH-66 Light are your best options.
Firstly, thoroughly clean the surface with a pressure washer. Once dry, apply one coat of PR-1. Leave this for 24 hours to dry, then tile over using ADH-55 or ADH-66 Light.
After minimum of 7 Days cured time, you can use any of our tile adhesives.
Yes. After minimum 24 Hours drying time, you can use any of our tile adhesives. If you are using ACT SCR-100 Engineered Screed follow directions on PDS
ADH-55 & ADH-66 Light can both be used for domestic swimming pool applications.
ADH-55 is the best tile adhesive for point load and vehicle traffic
