A full system for tiling pools, ponds and other permanently submerged areas, from moisture barrier through to grout. Get the waterproofing, adhesive and finishing steps in order below, or download the full specification for your pool project.
Download Specification PDFIf you require a specification document for a larger complex project, email us to projects@actaus.com.
Ensure substrate is clean, dry, and free from dust, oil, and contaminants. Surface must be structurally sound. Priming is optional depending on condition of the substrate.
Apply 2 coats of EP-2 Epoxy Primer and Moisture Barrier to the substrate.
Use WP MS-PU Polyurethane Sealant as a bond breaker in the corners, structural joints etc.
Apply minimum 2 coats of WP-1 PINK waterproofing membrane.
ADH-55 or ADH-66 are suitable for permanently submerged tiling applications.
Check Specification Document or product pages to select the best option for your job.
Choose from a wide range of colours of Spectrum Futura Lightweight Grout suitable for joints from 1mm to 30mm wide.
Select a colour of Spectrum Futura S-25 silicone to match the grout for all movement and perimeter joints.
Note! Silicone in submerged applications should be regularly inspected to ensure its continuous integrity in-situ.
